IBM 315, Руководство пользователя

Страница: 142 / 245

Testing the System
Using the PC Server 315 System Board Diagnostic
Diskette
All systems programs are located on a Diagnostic Diskette that come
with your server. Be sure to make a backup copy of the Diagnostic
Diskette onto another diskette.
Store the original Diagnostic Diskette in a safe place, and use the
backup copy of the system diskettes when configuring and
troubleshooting your server.
To start the diagnostic programs:
1. Insert the backup copy of the PC Server 315 System Board
Diagnostic diskette into the diskette drive.
2. Turn on the server. Or, if the server is turned on already, press
Ctrl
+
Alt
+
Del .
The server begins POST. If a power-on or administrator
password is set, the server prompts you for it.
Note: If an administrator password is set, you must enter it to
use the PC Server 315 System Board Diagnostic diskette.
3. After a few moments, the Main Menu appears. Follow the
instructions on the screen.
If the server stops during testing and you cannot continue, have the
system serviced.
If the diagnostic programs do not find a problem, see
“Troubleshooting” on page 161 and look for the problem symptom.
Using the Main Menu
The Main Menu, the starting point for the diagnostic tests, contains
the following choices:
Ÿ Diagnostics : When you select this choice from the Main Menu,
the Diagnostics Menu appears. The Diagnostics Menu contains
the following selections:
– Quick Check automatically checks the hardware
configuration and builds a group of tests based on the
128
PC Server 315 User's Handbook