IBM 315, Руководство пользователя

Страница: 46 / 245

Resolving Configuration Conflicts
resources that are in use by other devices are listed as a [System
Resource].
Select ISA Legacy Resources; then, use the Up Arrow (
↑
) or Down
Arrow (
↓
) key to highlight the assignment that you want to change.
Use the Left Arrow (
←
) or Right Arrow (
→
) key to select from the
list of available choices.
The ISA Legacy Resources choice appears only on the full
Configuration/Setup menu.
Resolving Configuration Conflicts
The resources used by your server consist of interrupt levels (IRQs),
DMA, I/O ports (for example, serial and parallel), and memory.
This information is useful when a resource configuration conflict
occurs.
Conflicts in the configuration occur if:
Ÿ
A device is installed that requires the same resource as another
device. (For example, a conflict occurs when two adapters try to
write to the same address space.)
Ÿ
A device resource is changed (for example, changing jumper
settings).
Ÿ
A device function is changed (for example, assigning COM 1 to
two different serial ports).
Ÿ
A software program is installed that requires the same resource
as a hardware device (for example, an expanded memory
specification (EMS) device driver that uses the address required
by the SVGA video adapter).
The steps required to resolve a configuration error are determined
by the number and variety of hardware devices and software
programs you install. If a hardware configuration error is detected,
a configuration error message appears after the server completes
POST and before the operating system is loaded. You can bypass
the error by pressing Esc while the error message is displayed.
30
PC Server 315 User's Handbook