IBM 315, Руководство пользователя

Страница: 208 / 245

Switch Settings
Microprocessor Switches
Attention: If the microprocessor bus-to-core ratio is incorrect,
system-board components will overheat and component damage
might occur. Be sure that microprocessor switch settings on the
eight-position switch block are set properly according to the speed
of your microprocessor.
To set bus-to-core ratio for your microprocessor, set switches 1
through 6 for either 180 MHz or 200 MHz as illustrated. Be sure to
set the switches according to the appropriate microprocessor speed.
180 MHz 200 MHz
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON ON
OFF OFF
Serial B or Infrared Port Switch
To enable Serial B port or enable the infrared port, set switch 7 as
illustrated.
Serial Port B
Enabling
Infrared Port
Enabling
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON ON
OFF OFF
Note: For additional information about the Serial B port or the
Infrared port enabling and port assignments, see “Changing
the Serial and Infrared Port Assignments” on page 21.
196
PC Server 315 User's Handbook