IBM 315, Руководство пользователя

Страница: 35 / 245

Using the Configuration/Setup Utility Program
You can advance through the screens by pressing the Page Up
(PgUp) or Page Down (PgDn) key. Use the Up Arrow (
↑
) or Down
Arrow (
↓
) key to move through the items on the screen. To change
a setting, highlight the item that you want to change; then, use the
Left Arrow (
←
) or Right Arrow (
→
) key to view the choices.
Press F1 for online Help information on each selection.
Starting the Configuration/Setup Utility Program
Note: If a configuration error occurs, a prompt appears before the
operating system starts (see “Resolving Configuration
Conflicts” on page 30).
To access the Configuration/Setup Utility program:
1. Turn on the server and watch the screen.
2. When the message
Press F1 for Setup
appears, press F1.
3. Follow the instructions on the screen to view or change the
configuration.
4. Select the Exit Setup option on the menu or press Esc to exit the
Configuration/Setup utility program.
You must correctly exit from the Configuration/Setup Utility
Program to save the configuration information.
If you change configuration information, and the change causes an
error during the power-on self-test (POST), a “
à ” displays next to
the menu selection that contains the change.
Chapter 2. Configuring Your Server
19