IBM 315, Руководство пользователя

Страница: 159 / 245

Error Messages
POST Message Description
185 A power failure damaged the stored information about the
drive-startup sequence.
Action: From the Configuration/Setup utility program Main
Menu, select Start Options. Then, follow the
instructions on the screen. For more information about
using the Configuration/Setup utility program, see
Chapter 2, “Configuring Your Server” on page 15.
186 A system board or security hardware error occurred.
Action: Have the system serviced.
189 An attempt has been made to access the server with invalid
passwords.
20X A failure occurred during testing of the memory. This error
can be caused by incorrectly installed memory, a failing
memory-module kit, or a system-board failure.
Action:
1. If you just installed memory, see “Working with
Memory-Module Kits” on page 68 to verify that
the new memory is correct for your system, that it
is installed correctly, and that the memory module
configuration matches one of the configurations
shown in the system memory table.
2. Run the diagnostic tests to verify the problem.
If the system diagnostic tests fail, have the system serviced.
Chapter 4. Solving Problems
145