IBM 2109 - SAN Fibre Channel Switch Model S16, Руководство по обслуживанию

Страница: 48 / 178

telnet [ switch IP address ]
3. Login using the admin userid. For example:
login: admin
4. Enter the password at the prompt. For example:
Password: password
Respond to the password prompt with the current switch password. The switch
ships with a default password of “password”.
5. Type the following command:
firmwareDownload [“host name/IP address”], [“user name”], [“filename”]
For example:
firmwareDownload “192.111.2.1”, “timm”,
“/tmp/os/v2.0.1a_0621”
Note: The host name is the host name or the host IP address. The username
is a valid host username. The file name is a path to the new firmware
file.
The RSH server validates the username and delivers the file to the switch
where it is stored in flash memory.
6. Restart the switch to initiate the new firmware.
Downloading firmware using a Microsoft
®
Windows NT operating
system
Perform this procedure to download firmware using Windows NT.
1. Download the firmware from the Web site at:
www.ibm.com/storage/fcswitch
Remember the directory name where you save the code.
Download the two utilities (rshd.exe and cat.exe) from the Web site. Download
these into the same directory as the firmware.
2. In a DOS window, enter:
rshd
[to execute the RSH daemon].
3. Go to “Downloading firmware from a UNIX
®
host” on page 31 and perform steps
2 through 6.
Note: When downloading to a switch with the firmwareDownload command, you
must use UNIX directory (forward slash /) addressing for the directory
location in the command, not PC (backward slash \) directory addressing.
For example, from Windows NT the firmwareDownload command would be:
firmwareDownload “192.111.2.1”, “timm”, “/tmp/os/v2.0.1a_0621”
.
32
IBM SAN Fibre Channel Switch: 2109 Model S16 Installation and Service Guide