IBM 2109 - SAN Fibre Channel Switch Model S16, Руководство по обслуживанию

Страница: 37 / 178

Attention: Do not install this switch in a rack where the internal rack-ambient
temperature will exceed 40°C.
v
Do not install this unit in a rack where the airflow is compromised. The airflow is
from the back of the unit to the front; therefore, do not block the front or the back
of the rack.
v
Take care that a hazardous condition is not created due to uneven mechanical
loading when installing this unit in a rack. If the rack this equipment is being
installed in has a stabilizer, it must be firmly attached before installing or
removing this unit.
v
This unit requires 2 A of power with an input of 110 - 127 V ac or 1 A with an
input of 200 - 240 V ac. Ensure that you do not overload the circuits you are
connecting this equipment to.
DANGER
An electrical outlet that is not correctly wired could place a hazardous
voltage on the metal parts of the system or the products that attach to the
system. It is the customer’s responsibility to ensure that the outlet is
correctly wired and grounded to prevent an electrical shock (72XXD201).
Before starting the switch rack-mount installation process, locate the rack-mount
slides and the mounting bracket package provided in the shipping container.
Overview
The rack-mount installation process is performed in four steps:
1. Mounting the moving slide and locking the ears to the switch.
2. Mounting the fixed portion of the slide in the rack.
3. Inserting the switch and moving a portion of the slide into the fixed portion on
the rack.
4. Locking the switch in the rack using the mounting ears installed in step 1.
Follow the detailed instructions for each step as identified in the following sections.
Chapter 3. Installing the switch
21
|
|
|