IBM 2109 - SAN Fibre Channel Switch Model S16, Руководство по обслуживанию

Страница: 21 / 178

The connectors are keyed and must be correctly aligned before they are inserted
into the GBIC-module connector. In most cases, one of the two connector plugs is a
different color to aid in proper connector alignment.
Note: Remove the protective plug from the GBIC. Do not force the fiber-optic plug
into the GBIC module as you may damage the connector, the GBIC module,
or both. Make certain that the fiber surface is clean and free of dust or debris
before inserting the connector into a GBIC module.
Front panel
Figure 6 shows the front panel buttons.
Control buttons
Table 2 on page 6 lists the primary control button functions. The function of the
button changes depending on the menu level. Buttons either control navigating
through the menus or they increment and decrement numeric values.
SJ000044
Figure 5. Dual SC fiber-optic plug connector
SJ000045
Display
Enter button
Up button
Tab/Esc button
Down button
RJ-45 10 BASE-T
connection
Fiber Channel Switch 2109 S16
Figure 6. Front panel functionality
Chapter 1. Introduction
5