IAI SW-4000T-MCL, Руководство пользователя

Страница: 26 / 124

SW-4000T-MCL User Manual (2.0) Preparation
- 26 -
Step 5: Adjust the Image Quality
Related Setting Items: AnalogControl
Note: For the details on the short ASCII commands required to configure the image quality
settings, see " Analog Control ".
To maximize the performance of the camera, configure its basic function in the following order.
1. Configure the Line Rate.
For more information, see Variable Line Rate .
2. Configure the Exposure Time.
For more information, see Electronic Shutter .
Note: The line rates and exposure times that can be set will vary depending on the
CameraLinkClockFrequency and ClConfiguration settings for Camera Link.
3. Perform DSNU and PRNU corrections.
For more information, see Pixel Sensitivity Correction .
4. Adjust the Black Level.
For more information, see Black Level Correction .
5. Adjust the White Balance using the automatic adjustment function.
a. Place a white sheet of paper or similar object under the same lighting conditions as
the intended subject, and zoom in to capture the white.
White objects near the subject, such as a white cloth or wall, can also be used. Be
sure to prevent the high-intensity spot lights from entering the screen. The white
balance is automatically adjusted.
b. Select the BalanceWhiteAuto tab, and select Once .
The white balance is automatically adjusted.
Step 6: Configure Various Other Settings
See “ Setting List ” or " Short ASCII Command List to configure settings as necessary.
Note: We recommend performing DSNU and PRNU calibration again whenever the line rate
setting is changed significantly.