IAI SW-4000T-MCL, Руководство пользователя

Страница: 89 / 124

SW-4000T-MCL User Manual (2.0) Short ASCII Command List
- 89 -
Acquisition Control
Name
Access
Short
ASCII
Values
Default
Value
Example / Description
RBExposureInterlocked R/W EI
0:Off
1:On
0
EI=[Param.]<CR><LF>
EI?<CR><LF>
Adjust exposure time of the R and B channels
automatically in conjunction with exposure time
of the G channel.
ExposureTimeMin R PEMIN - -
PEMIN?<CR><LF>
Display the minimum exposure time.
ExposureTimMax R PEMAX - -
PEMAX?<CR><LF>
Display the maximum exposure time.
AcquisitionLineRateOption R/W LROP
0: mode1
1: mode2
1
LROP=[Param.]<CR><LF>
LROP?<CR><LF>
Set the AcquisitionLineRateOption. If mode2 is
selected, the maximum line rate is limited.
Analog Control
Configure the analog control setting.
Note: Descriptions of each command can also be found in " AnalogControl " (Setting List).
Analog Control
Name
Access
Short
ASCII
Values
Default
Value
Example / Description
IndividualGainMode R/W GM
0:Off
1:On
0
GM=[Param.]<CR><LF>
GM?<CR><LF>
Configure Gain individually when set to On.
GainInt[DigitalAll] R/W GA 100 ~ 800 -
GA=[Param.]<CR><LF>
GA?<CR><LF>
Set Gain [DigitalAll], when IndividualGainMode
is Off.
GainInt[DigitalRed] R/W GAR
IndividualGainMode = Off:
40 ~ 400
IndividualGainMode = On:
100 ~ 1600
-
GAR=[Param.]<CR><LF>
GAR?<CR><LF>
Set Gain[DigitalRed]. The setting range varies
depending on the IndividualGainMode setting.
GainInt[DigitalGreen] R/W GAG
IndividualGainMode = Off:
40 ~ 400
IndividualGainMode = On:
100 ~ 1600
100
GAG=[Param.]<CR><LF>
GAG?<CR><LF>
Set Gain[DigitalGreen].