IAI SW-4000T-MCL, Руководство пользователя

Страница: 14 / 124

SW-4000T-MCL User Manual (2.0) Parts Identification
- 14 -
Note: The cable length at which communication will be possible will be limited when using a
cable that is not compatible with Camera Link, a small diameter type cable, or a high flex type
cable.
DIGITAL I/O - 1
Base (RGB8), Medium (RGB8,
RGB10), Full (RGB8), 80bit[Deca]
(RGB8)
Camera Link Connector 1
Pin
Input
Output
Signal Description
1, 26 Shield GND
2 (-), 15 (+) Out TxOUT0 Data output
3 (-), 16 (+) Out TxOUT1 Data output
4 (-), 17 (+) Out TxOUT2 Data output
5 (-), 18 (+) Out TxClk CL Clock
6 (-), 19 (+) Out TxOUT3 Data output
7 (+), 20 (-) In SerTC (RxD)
LVDS Serial Control
8 (-), 21 (+) Out SerTFG (TxD)
9 (-), 22 (+) In CC1 Trigger
10 (-), 23 (+) CC2 Reserved
11, 24 N.C
12, 25 N.C
13, 14 Shield GND
DIGITAL I/O - 2
Medium (RGB8, RGB10), Full
(RGB8), 80bit[Deca] (RGB8)
Camera Link Connector 2
Pin
Input
Output
Signal Description
1, 26 Shield GND
2 (-), 15 (+) Out TxOUT0 Data output
3 (-), 16 (+) Out TxOUT1 Data output
4 (-), 17 (+) Out TxOUT2 Data output
5 (-), 18 (+) Out TxClk CL Clock
6 (-), 19 (+) Out TxOUT3 Data output
7 (+), 20 (-) Reserved
8 (-), 21 (+) Out TxOUT0 Data output
9 (-), 22 (+)
Out TxOUT1 Data output
10 (+), 23 (-)
Out TxOUT2 Data output
11 (-), 24 (+)
Out TxClk CL Clock
12 (+), 25 (-)
Out TxOUT3 Data output
13, 14 Shield
GND