IAI SW-4000T-MCL, Руководство пользователя

Страница: 86 / 124

SW-4000T-MCL User Manual (2.0) Short ASCII Command List
- 86 -
Image Format Control
Configure image format settings.
Note: Descriptions of each command can also be found in " ImageFormatControl " (Setting
List).
Image Format
Control Name
Access
Short
ASCII
Values
Default
Value
Example / Description
Width R/W WTC
Min / Step: 16
(8)*
Max: 4096
(2048)* - OffsetX
4096
WTC=[Param.]<CR><LF>
WTC?<CR><LF>
Set the image width.
Note: *When BinningHorizontal = 2 or ImageScalingMode
= On, the value in parentheses is applicable.
OffsetX R/W OFC
Min: 0
Max: 4096
(2048)* - Width
Step: 16 (8)*
0
OFC=[Param.]<CR><LF>
OFC?<CR><LF>
Set the horizontal offset.
Note: *When BinningHorizontal = 2 or ImageScalingMode
= On, the value in parentheses is applicable.
BinningHorizontal R/W HB
1: Off
2: On
1
HB=[Param.]<CR><LF>
HB?<CR><LF>
Set the number of pixels in the horizontal direction for
which to perform binning.
BinningVertical R/W VB
1: Off
2: On
1
VB=[Param.]<CR><LF>
VB?<CR><LF>
Set the number of pixels in the vertical direction for which
to perform binning.
PixelFormat R/W BA
0: RGB8
1: RGB10
0
BA=[Param.]<CR><LF>
BA?<CR><LF>
Set the pixel format.
TestPattern R/W TPN
0:Off
1:White
2:GreyPattern1
(Ramp)
3:GreyPattern2
(Stripe)
4:ColorBar
0
TPN=[Param.]<CR><LF>
TPN?<CR><LF>
Select the test image.
SensorType R/W STP
0:TypeA (7.5um
x 7.5 um)
1:TypeB (7.5um
x 10.5um)
0
STP=[Param.]<CR><LF>
STP?<CR><LF>
Set the sensor type.