IAI SW-4000T-MCL, Руководство пользователя

Страница: 87 / 124

SW-4000T-MCL User Manual (2.0) Short ASCII Command List
- 87 -
Acquisition Control
Configure image capture settings.
Note: Descriptions of each command can also be found in " AcquisitionControl " (Setting List).
Acquisition Control
Name
Access
Short
ASCII
Values
Default
Value
Example / Description
AcquisitionLineRate R/W LR
1466 ~ 1515152
Unit: 0.01us
1515152
LR=[Param.]<CR><LF>
LR?<CR><LF>
Use this command to set the line rate of the
camera by specifying the line period. The unit
value is 1/100 μs.
Example : If you need 68212 Hz = 1466 (14.66
μs line period).
TriggerMode R/W TM
0:Off
1:On
0
TM=[Param.]<CR><LF>
TM?<CR><LF>
Enable/disable the Trigger mode.
TriggerSource R/W TI
0: Low
1: High
10-13:
PulseGenerator0-3
14-17: UserOutput0-3
20: Line4 TTL In1
21: Line5 Opt In1
23: Line7 CC1
24: Line10 TTL In2
26: NAND0 Out
27: NAND1 Out
28: Line13 TTL In3
29: EncoderTrigger
20
TI=[Param.]<CR><LF>
TI?<CR><LF>
Select the trigger signal source.
TriggerActivation R/W TA
0:Rising Edge
1:Falling Edge
2: LevelHigh
3: LevelLow
1
TA=[Param.]<CR><LF>
TA?<CR><LF>
Select the polarity of the trigger signal (i.e.,
location of signal at which trigger is applied).
ExposureMode R/W TR
0:Off
1:Timed
2: TriggerWidth
1
TR=[Param.]<CR><LF>
TR?<CR><LF>
Select the exposure mode.