background image

 

Performing Maintenance

 

FAM 25/45/60/75/95 

en(us) 

Page 88/160

BEWA FAM25-95 3402054f en(us) 2013-06-13 

2013-06-13

 

Replacing the Water Filter 

Rinse and clean the vacuum pump before changing the water filter. 

1.  Remove the covering tin of the vacuum pump.

 

2.  Remove the protection safety fence. 

3.  Replace the water filter. Dispose of the used 

water filters in an environmentally-friendly 
manner. 

4.  Perform the assembly in reversed order of 

sequence. 

5.  Remove the extract air hose at the extract air 

nozzle of the vacuum pump. 

6.  Switch on the power unit at the main switch and 

slowly fill the vacuum pump with around 1 liter of 
water via the extract air nozzle. 

7.  The water filters and hoses are to be monitored 

while doing so. It should be possible for you to 
identify the moving water in the hoses and in the 
water filter. 

If you cannot discern any movement, carefully 
blow compressed air through the hoses. 

8.  Mount the extract air hose onto the extract air 

nozzle of the vacuum pump. 

9.  Replacement of the water filter is complete. 

Check the vacuum pump for leaks while in 
operation. 

 

 

 

Содержание FluidAqua Mobil FAM 25

































































































































































Отзывы: