44
– MAINTENANCE & CARE
ROTARY HOOK
Apply lubrication oil to the rotary hook every third to
fourth hours when in constant use, but first turn off the
embroidery machine and unplug it from the electrical
outlet.
• Remove the bobbin.
• Add two to three drops of embroidery machine oil to
the rotary hook (1).
• Replace the bobbin.
MACHINE HEAD
Use white lithium grease every five months
• on the metal wheels (2)
• on the bottom metal bar (3) (both are located behind
the machines head)
Repeat the process on each side of the machine’s head,
using the manual needle switch display icon on your panel
to needle #1, then to needle #10.
• Needle switch display icon
LEVER ARMS
Apply a few drops of lubrication oil to the lever arms (4)
every week of continuous use. Do not drop on all ten arms
at the same occasion. The oil will spread.
MAINTENANCE AND CARE
This is the most important maintenance that needs to be completed.
Repeat the following process every time before using your embroidery machine to make sure the embroidery machine runs
smoothly.
Wipe down the outer surface with a soft cloth and clean the bobbin with the toolkit brush.
Use sewing machine oil ONLY for lubrication points (included in the toolbox).
White lithium grease can be found at any hardware store. It does not come in your toolbox.
1
2
3
4
