20
– PREPARATIONS
FAST THREADING OF THE TOP
THREAD
You can quickly replace a thread spool by tying the old
thread to the new thread. Follow the steps below to
correctly replace a spool.
1. Clip the thread from the spool you would like to
replace. Clip the thread right above the spool, making
sure the thread is still in the thread path.
2. Remove the old spool and place the new thread spool
on the spool pin.
3. Securely tie the new thread to the previous thread. Use
a knot that will pull easily through the needle’s eye. The
best knots are the square knot and the weaver’s knot.
4. Grab the thread under the presser foot, and pull the
new thread all the way through the needle.
5. If the knot does not make it through the needle eye,
cut off the knot and re-thread the needle.
