38
– COLOR TOUCH SCREEN
OFFSETTING THE HOOP
ON ONE NEEDLE
This function is used to offset the frame on a specific needle
during appliqué embroidery.
1. Press the color sequence icon (7).
The color sequence page will display (8).
2. Select the needle or color you wish to add the frame out
sequence to.
3. Select the needle you desire.
4. Select the hoop-out icon (9).
This will add the letter “F” to the selected needle number
for identification purposes.
Repeat steps three (3) and four (4) until all your needle
selections have been made.
5. Press the OK button.
You will be taken back to the home screen.
SETTING LOW SPEED ON A
SPECIFIC NEEDLE
This function is used to select a low speed option on a specific
needle or needles that require a lower speed due to thread type
or intricacy of design area.
1. Press the color sequence icon (10).
The color sequence page will display.
2. Select the needle or color to be reduced in speed.
3. Select the needle you desire.
4. Select the low speed icon (11).
This will add the letter “L” to the selected needle number
for identification purposes.
Repeat steps three (3) and four (4) until all your needle
selections have been made.
5. Press the OK button.
You will be taken back to the home screen.
7
8
9
10
11
12
