COLOR TOUCH SCREEN –
37
USING FLOAT MODE
Float is used to describe fast-forwarding or rewinding. This feature can only
be accessed when the embroidery machine is on a locked embroidery status
mode. To check the status of the embroidery machine, see the Embroidery
status section.
F.L represents floating on low speed.
F.H represents floating on high speed.
ADD represents manual mode.
HOW TO FLOAT THROUGH A DESIGN
1. Press the stitch floating mode icon.
Pressing the stitch floating mode icon once will display the “F.L” icon (1).
Pressing the stitch floating mode icon twice will display the “F.H” icon (2).
Pressing the stitch floating mode icon three times will display the “ADD”
icon (3).
2. To rewind or fast-forward a design, either in F.L or F.H mode, press
and hold the plus (+) or minus (-) icon until you reached your desired
placement.
To fast-forward a design in manual mode, press the + to enter the exact
location by stitch amount (4).
To rewind a design in manual mode, press the - to subtract by stitch count
to reach your exact location (5).
Press the color spool icon (6) to travel from one color sequence to
another.
3. Once you have reached the desired position, press the stitch floating mode
icon until you exit from the options.
4. Press the Start/Stop button to resume the embroidery.
2
3
4
5
1
6
