8
Intended Use and General Safety Instructions
Danger!
Non-intended use can lead to severe personal injury and damages to the system. The
temperature control device must not be used for any purpose other than temperature
control according to the operating instructions.
Transport damage!
Please check for any transport damage when unpacking. Please contact the forwarding
agent or supplier to clarify liabilities for damages. Never attempt to start-up a damaged
device. Fix the damage or ensure that the damage affect has been assessed prior to
using the device.
The temperature control device has been manufactured for commercial use and serves
as a temperature control device for external applications, such as reactors and other
suitable objects in the laboratories and the industry. Thermal fluids that are suitable for
the total system are used. The heating efficiency is supplied at the pump connections.
The technical specifications of the temperature control device are listed in the data
sheet. The temperature control device is to be used according to the instructions. A
non-observance of the operating instructions is considered improper use.
The temperature control device corresponds with the latest technology and the valid
safety-related regulations. Safety systems have been integrated into your temperature
control device.
The following must be observed:
Operate the device only in safe and perfect working conditions!
Start-up and repair must be performed only by authorised experts!
Safety systems must not be bridged, disassembled or turned off!
The manufacturer is not liable for damages arising from technical modifications on the
temperature control device, non-intended handling or use of the temperature control
device without regard to the operating instructions.
With temperature control devices without a controlled cooling water flow (not w HT),
the following must be noted: to minimise injury and damage, the cooling water release
temperature is monitored and set to a maximum temperature of 95°C (this takes place
after the power on / power off as part of the set-up).
It is possible to increase cooling water release temperatures up to the end temperature,
in this case however, the Huber company is not responsible for damage or injury
occurring to the operator or user. It is essential that a risk assessment is carried out.
Use as a medical product (e.g. in Vitro diagnostics etc.) is not allowed.
Predictable misuse:
-
The brakes must be locked on devices with rolls or rolling bases.
