Huawei USG6000 Series, Руководство по оборудованию

Страница: 408 / 415

l
Wear the ESD uniform, ESD gloves, and ESD shoes before entering the equipment
room.
l Locate the equipment room far away from areas with dense corrosive gases, such as
chemical plants.
l The air intake vent of the equipment room must not face any pollution source.
l Place batteries in a different room from the devices.
l Invite professionals to measure the temperature, humidity, and other factors periodically.
A.3.3 ESD Requirements
This section describes the ESD requirements. Ensure that the equipment room meets these
requirements because static electricity may damage the USG components and cause the USG
to malfunction.
The absolute value of the static voltage must be less than 1000 V. To meet the requirement,
take the following measures in the equipment room:
l
Provide operators with ESD protection training.
l
Adjust the humidity to reduce the impact of static electricity.
l
Install an ESD floor in the equipment room.
l
Wear an antistatic suit, ESD gloves, and antistatic shoes before entering the equipment
room.
l Use ESD tools, such as ESD wrist straps, ESD tweezers, and extractors.
l All the conductors in the equipment room, including computer terminals, must be
properly grounded. Set up an antistatic workbench.
l Electrostatic sources, such as non-ESD plastic bags, non-ESD foam, and rubber objects
must be kept at least 30 cm away from ESD-sensitive components and boards.
To protect the USG boards from damage caused by static electricity discharge, take the
following measures:
l Ensure that the USG is properly grounded according to the grounding requirements.
l Wear an ESD wrist strap before performing any operations on the USG.
l Ensure proper contact between the metal buckle of the ESD wrist strap and the operator's
skin. Ensure that the other end of the ESD wrist strap is already connected to the ESD
jack on the USG, as shown in
Figure A-20 . In addition, wearing ESD gloves is
recommended.
HUAWEI USG6000 Series
Hardware Guide
A Appendix
Issue 08 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
394