Name
Description
MGMT port
Out-of-band 10/100/1000M RJ45 autosensing Ethernet management
port. The interface number is GigabitEthernet 0/0/0 and the default IP
address of the interface is 192.168.0.1.
You can connect this port to the network port or any reachable port on a
PC through a network cable. Then, you can use Telnet to access the CLI
or use a web browser to access the web UI to configure, manage, and
maintain the USG.
NOTE
The MGMT port cannot be used as a service port.
Console port
(RJ45)
Console ports allow you to locally connect a PC to the device. You can
use a console cable to connect the console port (RJ45) on the device to
the COM port on your PC and use a serial port terminal program on
your PC to access, configure, and manage the device.
USB 2.0 port
l
USB ports allow you to insert USB devices for system software
upgrades. For details on upgrades through USB devices, refer to the
Upgrade Guide
delivered with the device.
l
USB ports allow you to insert 4G LTE data cards. For details on the
4G LTE data cards, refer to
0 to 3 (RJ45)
NOTE
Arrowheads
show the
positions of
ports. A down
arrowhead
indicates a port
at the bottom,
and an up
arrowhead
indicates a port
at the top.
Service ports. They are four 10/100/1000M autosensing Ethernet
electrical ports numbered from GigabitEthernet 1/0/0 to
GigabitEthernet 1/0/3.
4 to 5 (RJ45 +
SFP)
NOTE
Arrowheads
show the
positions of
ports. A down
arrowhead
indicates a port
at the bottom,
and an up
arrowhead
indicates a port
at the top.
Combo ports. Combo ports are logic ports. One combo port can work as
a GE electrical interface or a GE optical port. Each combo port has only
one internal forwarding port. When the electrical port is enabled, the
optical port is disabled. When the optical port is enabled, the electrical
port is disabled. The electrical and optical ports of a combo port use the
same interface view, numbered from GigabitEthernet 1/0/4 to
GigabitEthernet 1/0/5. By default, the combo port is used as an electical
port. You can use the
combo enable
{
copper
|
fiber
} command to set
the working mode of combo ports according to network requirements.
Each optical port supports a
.
Indicators
HUAWEI USG6000 Series
Hardware Guide
2 Hardware Overview
Issue 08 (2017-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
114
