Huawei NetCol5000-C030H90D0 Скачать руководство пользователя страница 3

Страница: 3 / 206

About This Document

Purpose

This document describes the smart cooling product (NetCol5000-C for short) in

terms of the product description, indoor unit installation, commissioning, and

system operation and maintenance, helping readers to systematically master the

usage and maintenance of the NetCol5000-C.

The figures provided in this document are for reference only.

Intended Audience

This document is intended for:

●

Sales engineers

●

Technical support engineers

●

System engineers

●

Hardware installation engineers

●

Commissioning engineers

●

Data configuration engineers

●

Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which,

if not avoided, will result in death or serious

injury.

Indicates a hazard with a medium level of risk

which, if not avoided, could result in death or

serious injury.

NetCol5000-C(030, 032, 065) In-row Chilled Water

Smart Cooling Product

User Manual (2019)

About This Document

Issue 03 (2020-08-30)

Содержание NetCol5000-C030H90D0















































































































































































































Результаты поиска

Содержание NetCol5000-C030H90D0

Отзывы:

Бренды по названию

Популярные бренды

Huawei NetCol5000-C030H90D0, Руководство пользователя

Результаты поиска

Содержание NetCol5000-C030H90D0

Отзывы:

Бренды по названию

Популярные бренды