User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-15
II.
SPC User
In user mode, you can use the command
show spc
[
connectid
connectid
| from-connectid
fromid
[
to-connectid
endid
] ] to query the SPC data.
Example: Show SPC users.
IAD2000>
show spc
{ <cr>|connectid<K>|from-connectid<K> }:
Command:
show spc
------------------------------------------------------
-
index state type Port Port name
0 Normal IP-SPC 1 - ipspc
IAD2000>
7.2.5 Sending On-hook Signals to Console
After an IAD subscriber hooks on, the IAD can be configured to
send the on-hook signals to the IP console, so as to facilitate the
console to charge accurately.
Table 7-6
Related commands
Operation Command
Send on-hook signal to IP console
IAD2000(config)#
console
ip
Cancel the sending of on-hook signal to
IP console
IAD2000(config)#
no console
