User Manual
U-SYS IAD108 Integrated Access Device
Chapter 4 Configuring Data
4-24
Table 4-7
Commands for IAD108 to obtain IP address through PPPoE dialup
Operation Command
Configure PPPoE user name
and password
IAD2000(config)#
pppoe username
usermane
password
password
Enable PPPoE
IAD2000(config)#
pppoe
{
disable
|
enable
}
Show PPPoE configuration
IAD2000>show pppoe
username
: PPPoE user name, a character string ranging 1–31
characters.
password
: PPPoE user password, a character string ranging
1–31 characters.
The user name and password are used on the broadband
access server (BAS) for authenticating the user. They must be
consistent with those configured on the BAS.
Example: Configure IAD108 to obtain IP address through
PPPoE dialup mode. The operations are as follows.
3) Set the PPPoE user name as “zw@isp”, and password as
“huawei”.
IAD2000(config)#
pppoe username zw@isp password huawei
IAD2000(config)#
4) Start
PPPoE
function
IAD2000(config)#
pppoe enable
IAD2000(config)#
5) Check PPPoE configurations
IAD2000(config)#
show pppoe
--------------------------------------------------
