User Manual
U-SYS IAD108 Integrated Access Device
Chapter 4 Configuring Data
4-1
Chapter 4 Configuring Data
In this chapter, the methods and steps for configuring IAD108
data through command line are introduced.
4.1
Preparations Before Configuration
Before configuring IAD108, you should prepare the basic data
of this IAD108 and know the user name and password used for
logging into the device.
4.1.1 Collecting Data
Before configuring data, you must plan the data of IAD108, such
as IP address of IAD108, and IP address of the related servers.
Since IAD108 interworks with Media Gateway Controller (MGC), you
should also plan the data for the interconnection between them.
The IP addresses need to be planned are listed in Table 4-1.
Table 4-1
IP address allocation table
No.
Item
Remarks
1
IP address of IAD108
None.
2
IP address of the default gateway for
IAD108’s uplink
LAN Switch or low end
router
3
IP address of MGC
In this manual, SoftSwitch
is taken as an example of
MGC.
