User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-7
Operation Command
Show the information output switch for the log
host
IAD2000>
show infoswitch
syslog
Show the information output switch for the
Web-based NMS
IAD2000>
show infoswitch
www
2) Descriptions of commands:
z
When you set the command line terminal information
output switch and level, you should input the parameter
“Client ID”, which can be obtained through command
show
client
. The
show client
command will display the
information of command line client end of the registered
users, including terminal user number (Client ID), user
name, IP address and login time.
z
You can set the output switch of multiple information types
at the same time.
There are two switches controlling the report of alarm
information to the command line terminal.
z
Switch 1: Use the command
infoswitch cli
to set whether
to report alarm information to the command line terminal. It
controls the output of all the alarm information.
z
Switch 2: Use the command (
no
)
alarm output
to set
whether to send the corresponding alarm to the command
line terminal according to a certain condition. It controls the
alarm information according to the categories.
3) Usage example
