User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-12
portid
: Number of the port, of which the service is to be
terminated. The value ranges from 0 to 7.
II.
SPC Service
The start or termination of Semi-Permanent Connection (SPC)
service is actually the linking or releasing of the SPC. After you have
released an SPC, the relevant configuration data is not removed.
You can establish the SPC again when necessary.
Table 7-4
Related commands
Operation Command
Release an SPC
IAD2000(config)#
spc release
{
connectid
connectid
|
from-connectid
fromid
[
to-connectid
endid
] }
Recover an SPC
IAD2000(config)#
no spc release
{
connectid
connectid
|
from-connectid
fromid
[
to-connectid
endid
] }
The parameters of the commands are listed in Table 7-5.
Table 7-5
Parameters of the commands related to SPC services
Item Description
connectid
Index of SPC, ranging 0–7.
fromid
Index of the start SPC, ranging 0–7.
endid
Index of the end SPC, ranging 0–7.
