User Manual
U-SYS IAD108 Integrated Access Device
Chapter 4 Configuring Data
4-34
2) Use
command
mg register-key
to configure registration
key on the IAD108. The registration key configured on the
IAD108 must be the same as that configured on the MGC.
The registration key is a character string with 8–31
characters, and it is optional.
Note:
When configure the MG registration key, take the one set on MGC as the standard
key. Otherwise, the MG cannot register successfully.
Example: Configure the IAD108 to register the MGC in standard
mode. The registration key on the MGC is “iad108register”, and
protection password is “iad108password”. After configuration, check
as follows:
IAD2000(config)#
mg register-mode standard
{ <cr>|register-key<K> }:
Command:
mg register-mode standard
IAD2000(config)#
mg register-key iad108register password
iad108password
{ <cr>|register-mode<K> }:
Command:
mg register-key iad108register password
iad108password