User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-27
7.4.1 Adding Log host
I.
Command Description
The log host is used to receive log information generated by the
system. The parameter of the log host must be added in IAD108
before the log host is used; otherwise the system will not send the log
to the host, and the user can not query the log in log host.
In global config mode you can execute command
loghost add
ip
hostname
to add the log host.
Example: Add a log host “log”, with IP address as
210.11.123.56.
IAD2000(config)
# loghost add 210.11.123.56 log
IAD2000(config)#
II.
Parameter Descriptions
ip
: IP address of the log host, which is in dotted decimal
notation.
hostname
: Name of the log host, a string of no more than 31
characters. It cannot be null.
Note:
z
There can be no repeated log host name or IP address.
z
When a log host is added, it will not receive log information reported from the
system until the log host is activated.
