User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-48
This method can be adopted when you want to query whether a
certain alarm is generated. The meanings of the parameters in the
command are listed in Table 7-11.
Table 7-11
Parameters of the command
Item Description
id
Alarm ID, ranging 52–1572886.
startnum
The alarm number from which the display starts, the value range is
1–1000. In the Command Line Interface (CLI), you can start the
display from 1, or from a designated
startnum
.
number
Maximum number of alarm records after the
startnum
that can be
displayed in one time. It is an optional parameter, ranging 1–1000.
III.
Querying by Alarm Level
Command:
show alarm record alarmlevel
level
[
startnum
number
]
This method can be adopted for showing alarm record if you
only focus on alarms of a certain level. The meanings of the
parameters in the command are listed in Table 7-12.
Table 7-12
Parameters of command
Item Description
level
Alarm level. There are four levels. It is only necessary to input the
English word indicating the corresponding level directly.
