User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-21
7.3.4 Setting Reenter Number
The reenter number of an operator is generally set as 1 when
the operator is added into the system. If the reenter number of a
certain operator should be changed, the Root or Admin can do the
job.
The users with different authorities can modify their reenter
times by following the rules below.
z
Root can change the reenter numbers of all the operators.
z
Admin operator can change the reenter numbers of Oper
operators and Exec operators, but cannot change that of
other Admin operators.
z
Oper operators and Exec operators cannot change the
reenter numbers of themselves and others.
Note:
The reenter number of an operator ranges from 0 to 4. When it is 0, the operator
cannot log in to the system.
Example: Modify the reenter number of user “bbb” to 2:
IAD2000(config)#
user reenter
User Name(<=15 chars):
bbb
Permitted Reenter Number(0--4):
2
Confirm Reenter Number(0--4):
2
Changed ok!
Continue? [Y|N]:n
