User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-43
7.4.11 Showing Information Output Control Level of
Log Host
In the user mode, you can run the following command to show
the information output control level of an existing log host.
show infolevel syslog
[
syslog
|
oprlog
|
debug
|
alarm
|
trace
|
diagnose
|
stat
|
other
] {
ip | hostname
}
Note:
z
Information level value, ranging 0–4 (0–4 are information levels, and 4 is the
highest level).
z
Operations can be carried out on one or multiple information types. If
information type is not specified, the information of all the information types will
be shown.
Example: Show the information output control levels of the
alarm information type and other information types of the log host
whose name is “log”.
IAD2000>
show infolevel syslog log alarm debug diagnose
oprlog other stat syslog trace
The terminal info output level:
SYSLOG_TYPE:0
OPRLOG_TYPE:0
DEBUG_TYPE :0
ALARM_TYPE : 0-all; 1-no
DIAG_TYPE :0
