User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-13
7.2.2 Resetting Access User Port
In glob config mode, you can execute command
reset
portid
to
reset the access user port.
Caution:
If you reset the access user port, the established services will be interrupted. Use it
cautiously.
7.2.3 Showing Port Status
In the user mode, you can run the command
show port state
[
portid
]
to display the port status information.
portid
: Number of the port, ranging 0–7. If no port number is
entered, the status of all the ports will be shown.
Example: Show the status of No.6 port.
IAD2000>
show port state 6
------------------------------------------------------
-
Port PortType State ServiceType ServiceState
------------------------------------------------------
-
