7.
Return to the
License Management
screen in the StoreOnce Management Console.
8.
Expand the
Actions
menu (
), click the Add License icon (
). and then follow the onscreen
instructions.
Scanning and configuring storage
After storage is added to a StoreOnce System, you must scan and configure the storage to make it
usable.
Procedure
1.
On the main menu, select
Settings
.
2.
In the
Hardware
section, click the
Storage
panel.
3.
On the
Storage
screen, click the
Local Storage
tab, and then expand the
Actions
(
) menu and
select
Rescan
.
Newly detected storage is added to the storage list with a status of
Unconfigured
.
4.
To configure the new storage for use, expand the
Actions
(
) menu and select
Configure
.
Checking hardware and firmware
Procedure
1.
Navigate to the StoreOnce System and log in to the StoreOnce Management Console.
2.
On the main menu, select
Settings
.
3.
In the
Hardware
section, select the
Hardware Monitoring
panel.
4.
Review the
Requires Attention
and
Storage
tabs for any events requiring attention.
5.
Expand the
Actions
(
) menu and select the
Update firmware
icon (
) to check and update
firmware.
Disabling maintenance mode
Procedure
1.
From the StoreOnce Management Console main menu, select
Settings
.
2.
In the
System
section, select the
Maintenance mode
panel.
3.
On the
Maintenance mode
screen, set the
Maintenance mode
switch to the
Off
position (
),
and then click
OK
.
Installing capacity upgrade kits
121
