b.
Position left and right rack rails at the correct 'U' position in the rack, adjusting the rails to fit the
rack, as needed. Front and Rear bottom edge of rails must align with the bottom of EIA boundary
in the lowermost 'U'.
NOTE:
Rails are marked L and R with an arrow indicating the direction in which the rail is
installed.
c.
Use guide pins to align the shelf mount kit to the rack column holes.
d.
To engage the rear rail rack mount, push the rail toward the back of the rack until the spring hook
snaps into place.
e.
To engage the front rail rack mount, pull the rail towards the front of the rack to engage the spring
hook with the rack column in the same manner as the rear spring hook.
NOTE:
Make sure that the respective guide pins for the square or round hole rack align properly
into the column hole spacing.
HPE StoreOnce 5200 System
41
