a.
On the main menu, select
Settings
.
b.
In the
Security
section, click the
Certificates
panel.
c.
On the
Certificates
screen, select Generate CSR on the
Actions
menu.
9.
Expand storage, if necessary. Capacity upgrades ordered with the system will have already been
configured. If capacity upgrades were ordered separately, configure them now.
a.
On the main menu, select
Settings
.
b.
In the
Hardware
section, click the
Storage
panel.
c.
On the
Storage
screen, click the
Local Storage
tab, and then expand the
Actions
(
) menu
and select
Rescan
.
Newly detected storage is added to the storage list with a status of
Unconfigured
.
d.
To configure the new storage for use, expand the
Actions
(
) menu and select
Configure
.
10.
Configure Remote Support using STaTS.
For additional information, see
.
11.
Configure Fibre Channel.
For additional information, see
Fibre Channel with StoreOnce Systems
12.
Configure iLO, if necessary.
If you plan to use iLO with the system and did not configure it during the system installation,
configure iLO now.
• View or update the iLO configuration from the StoreOnce Management Console.
a.
On the main menu, select
Settings
.
b.
In the
Hardware
section, click the
Integrated Lights Out (iLO) Configuration
panel.
The
Integrated Lights Out (iLO) Configuration
screen shows the HPE Integrated Lights Out
network configuration.
• In environments that do not use DHCP, DNS, or WINS, configure a static IP address during
bootup.
a.
Restart or power on the StoreOnce Server.
b.
Press
F9
in the server POST screen.
The UEFI System Utilities start.
c.
Navigate to
System Configuration > iLO 5 Configuration > Network Options
.
d.
Configure the iLO network options and note the iLO IP address, iLO subnet mask, and iLO
gateway.
13. The StoreOnce 5250 or 5650 System is now installed and ready for production use.
70
HPE StoreOnce 5250 and 5650 Systems