If you are you unable to resolve the issues, submit a support case through AHSV. For more information,
see the AHSV user guide on the Hewlett Packard Enterprise website (
).
More information
HPE iLO 5 on page 139
Active Health System on page 138
Using the OA CLI on page 34
Remote access to the Virtual Connect Manager on page 32
Remote access to the Virtual Connect Manager
You can access the VCM CLI remotely through any SSH session.
Procedure
1.
Using any SSH client application, start an SSH session to the VCM.
2.
When prompted, enter the assigned IP address or DNS name of the VCM.
3.
Enter a valid user name.
4.
Enter a valid password. The CLI command prompt is displayed.
5.
Enter commands for the VCM.
6.
To terminate the remote access SSH session, close the communication software or enter Exit at the
CLI command prompt.
For more information, see the
HPE Virtual Connect Manager Command Line Interface for c-Class
BladeSystem User Guide
on the Hewlett Packard Enterprise website (
Using iLO for remote troubleshooting of servers and
server blades
Procedure
1.
Log in to the iLO web interface
2.
Review the initial
Overview
screen for status and health.
Observe the following fields on the Overview screen:
• System ROM
• iLO Firmware version
• System health
• Server power
• SD card status
3.
To display the Summary tab, click
System Information
in the navigation tree.
32
Remote access to the Virtual Connect Manager
