manualshive.com logo in svg

HP Surestore Disk Array 12h - And FC60, Руководство для продвинутых пользователей, Страница: 60 / 466

Поделиться
Скачать
HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 60

60

        Disk Array High Availability Features

 

Table 5

 

RAID Level Comparison: Application and I/O Pattern Performance Characteristics

RAID level

Application and I/O Pattern Performance

RAID 0 

RAID 0 is a good choice in the following situations:
– Data protection is not critical. RAID 0 provides no data redundancy for 

protection against disk failure.

– Useful for scratch files or other temporary data whose loss will not seriously 

impact system operation.

– High performance is important.

RAID 1

RAID 1 is a good choice in the following situations:
– Speed of write access is important.
– Write activity is heavy.
– Applications need logging or recordkeeping.
– Daily updates need to be stored to a database residing on a RAID 5 group. 

The database updates on the RAID 1 group can be copied to the RAID 5 
group during off-peak hours.

RAID 0/1

RAID 0/1 is a good choice in the following situations:
– Speed of write access is important.
– Write activity is heavy.
– Applications need logging or recordkeeping.
– Daily updates need to be stored to a database residing on a RAID 5 group. 

The database updates on the RAID 1 group can be copied to the RAID 5 
group during off-peak hours.

RAID 3

RAID 3 is a good choice in the following situations:
– Applications using I/O large sequential transfers of data, such as multimedia 

applications.

– Applications on which write operations are 33% or less of all I/O operations.

RAID 5 

RAID 5 is a good choice in the following situations:
– Multi-tasking applications using I/O transfers of different sizes.
– Database repositories or database servers on which write operations are 

33% or less of all I/O operations.

– Multi-tasking applications requiring a large history database with a high read 

rate.

– Transaction processing is required.

Содержание Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов