manualshive.com logo in svg

HP Surestore Disk Array 12h - And FC60, Руководство для продвинутых пользователей, Страница: 225 / 466

Поделиться
Скачать
HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 225

Adding Disk Enclosures to Increase Capacity      

 225

Inst

alla

tion

•

Consider Adding More Than One Disk Enclosure - Because the process of adding 
disk enclosures involves backing up data and powering off the disk array, you should 
consider adding more than one enclosure to meet your future capacity needs. This will 
avoid having to redo the procedure each time you add another disk enclosure. And the 
addition of a single enclosure provides limited flexibility for configuring LUNs on the 
disk array.

•

Avoid Using Split-bus and Full-bus Mode in the Disk Array - To simplify disk array 
and LUN management, it recommended that you avoid mixing split-bus and full-bus disk 
enclosures in the same disk array.

Step 1. Plan the Expanded Configuration

Your expansion strategy will be dictated by the amount of capacity you are adding to the 
disk array. This includes both the number of new enclosures you are adding, and the 
number of new disk modules. Careful planning will help ensure that the expansion is 
performed successfully. 

1. Identify the original disk array configuration by performing the following tasks:

a. Create a detailed diagram of the existing Disk Array FC60 layout.

b. Attach a label to each Fiber Channel cable attached to the disk array, identifying the 

host interface and disk array controller port it connects.

c. Identify the disks comprising each LUN on the disk array. Then attach a label to each 

disk in the LUN, identifying its LUN number and channel:ID. For example, LUN 0, 
4:0. The channel and ID assigned to each disk are a function of the enclosure and slot 
the disk is installed in. 

d. Identify all global hot spare disks in the disk array. Then attach a label to each global 

hot spare disk, identifying the channel:ID of the disk.

Note

A global hot spare disk should not be moved. If you intend to move a hot spare 
disk that is not in use, the disk must be removed from the hot spare group. This 
will change its role to Unassigned. After the disk has been moved to its new 
location, it can again be assigned the role as a global hot spare.

Содержание Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов