HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 466

HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 6

6

Related Documents and Information

The following items contain information related to the installation and use of the HP SureStore E
Disk Array and its management software.

•

HP SureStore E Disk Array FC60 Advanced User’s Guide - this is the expanded version of the
book you are reading. Topics that are discussed in more detail in the Advanced User’s Guide are
clearly identified throughout this book.

!

"

Download: www.hp.com/support/fc60

•

HP Storage Manager 60 User’s Guide - this guide describes the features and operation of the
disk array management software for Windows NT and Windows 2000. It is included with the
A5628A software kit.

!

"

Download: www.hp.com/support/fc60

•

HP Storage Manager 60 Introduction Guide - this guide introduces the disk array management
software for Windows NT and Windows 2000. It is included in electronic format on the HP
Storage Manager 60 CD.

!

"

Download: www.hp.com/support/fc60

•

Fibre Channel Mass Storage Adapters Service and User Manual (A3636-90002) - describes
Fibre Channel Mass Storage/9000. It describes installation of the Fibre Channel I/O adaptors into
K-, D-, T-, and V-class systems.

!

"

Download: www.hp.com/essd/efc/A3636A_documentation.html

•

Using EMS HA Monitors (B5735-90001) - contains information about the EMS environment
used for hardware monitoring.

!

"

Download: http://www.docs.hp.com/hpux/ha/

•

EMS Hardware Monitors User’s Guide - describes how to use the EMS Hardware Monitors to
protect your system from undetected failures.

!

"

Download: http://www.docs.hp.com/hpux/systems/

•

Diagnostic/IPR Media User’s Guide (B6191-90015) - provides information on using STM, and
enabling the EMS Hardware Event Monitors.

!

"

Download: http://www.docs.hp.com/hpux/systems/

•

Managing MC/ServiceGuard (B3939-90024) - provides information on creating package
dependencies for hardware resources.

!

"

Download: http://www.docs.hp.com/hpux/ha/

«
...
4
5
6
7
8
...
»

Содержание Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов