HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 362 | Manualshive

Страница: 362 / 466

HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 362

362

Introduction

HP-UX Troubleshooting Tools

There are several tools available for troubleshooting the disk array on an HP-UX host. This
includes monitoring the operation of the disk array and gathering information that will help
identify and solve the problem.

•

Array Manager 60 - primarily used to manage the disk array, Array Manager 60 can also
be used to check the status of the disk array and to retrieve log information.

•

Support Tools Manager (STM) - the Information Tool of STM is one the most valuable
sources of information for identifying problems with the disk array.

Windows NT and Windows 2000 Troubleshooting Tools

The HP Storage Manager 60 software includes a set of tools for troubleshooting the disk
array. See the HP Storage Manager 60-NT User’s Guide for information on using the HP
Storage Manager 60 software.

EMS Hardware Event Monitoring (HP-UX Only)

EMS hardware monitoring is one the most important troubleshooting tools available for
the Disk Array FC60. With EMS monitoring, you can be alerted to problems as they occur,
allowing you to respond quickly to correct a problem before it impacts disk array
operation. All components and aspects of disk array operation are monitored. And EMS
gives you the flexibility to deliver event notification using a variety of different methods.

More information on EMS Hardware Monitoring can be downloaded from the Systems
Hardware, Diagnostics, and Monitoring section of HP’s Online Documentation web site at
www.docs.hp.com/hpux/systems.

«
...
360
361
362
363
364
...
»

Содержание Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов