manualshive.com logo in svg

HP Surestore Disk Array 12h - And FC60, Руководство для продвинутых пользователей, Страница: 317 / 466

Поделиться
Скачать
HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 317

Status Conditions and Sense Code Information      

 317

M

a

na
ging

 the

 Di
sk 
Array 

on HP-UX

Status Conditions and Sense Code Information

The following tables may be useful interpreting the various types of disk array status 
information that is returned by the management tools. Where appropriate, any required 
action is identified.

LUN Status Conditions

The LUN status condition terminology used by Array Manager 60 (AM60) may differ from 
that used by STM. Both terms are identified in the table.

Table 40  

LUN Status Conditions 

Status

Definition/Action

AM60

: OPTIMAL

STM

: OPTIMAL

The LUN is operating normally.
No action is required.

AM60

: OPTIMAL--PARITY SCAN 

IN PROGRESS

STM

: OPTIMAL

A parity scan is in progress on the disk array.
No action is required.

AM60

: OPTIMAL-REDUNDANCY 

RE-INITIALIZATION PENDING OR 
IN PROGRESS

STM

: OPTIMAL

A background parity sync operation is in progress on this 
LUN. 
No action is required. The LUN can be used immediately.

AM60

: DEGRADED--WAITING 

FOR REPAIR ACTION

STM

: DEGRADED - 1

A disk has failed and there is no hot spare to perform a 
rebuild.
Replace the failed disk or add a hot spare.

AM60

: DEGRADED--REPLACED 

DISK BEING FORMATTED

STM

: DEGRADED - 65

A disk has been replaced and is being formatted prior to 
starting a rebuild on this LUN.
No action is required.

Содержание Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов