manualshive.com logo in svg

HP Surestore Disk Array 12h - And FC60, Руководство для продвинутых пользователей, Страница: 267 / 466

Поделиться
Скачать
HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 267

Managing the Disk Array Using SAM      

 267

M

a

na
ging

 the

 Di
sk 
Array 

on HP-UX

6. Select the disk you want to identify. A check mark will appear on the selected disk and 

all the other disks in the same disk group. For example, if the selected disk is part of a 
LUN, all disks within the LUN will be checked. If the disk is a global hot spare, all global 
hot spares will be checked.

7. Click on the Disk LED Flash Options button and select the desired option:

– Flash One will flash the Fault LED on the selected disk only. 
– Flash Group will flash the Fault LEDs on all disk within the group
– Flash Enclosure will flash the Fault LEDs on all disks in the same enclosure as the 

selected disk 

– Flash All flashes the Fault LEDs on all disks within the entire disk array

8. Click Start to begin flashing the Fault LEDs

9. Click Stop to stop flashing the Fault LEDs, or click O

K

 to close the window and stop the 

flashing.

Binding a LUN

A number of settings allow you to define the LUN configuration. Before binding a LUN, 
make sure you understand what each of the settings does and how it will impact LUN 
behavior. See 

"Configuring LUNs" on page 242

 for more information.

The LUN binding process is designed to maintain high-availability by recommending that 
you avoid creating a LUN that includes more than one disk per enclosure. If you attempt to 
do so, you will be alerted that the resulting LUN will be vulnerable to an enclosure failure.

Note

How long does it take to bind a LUN?
The time it takes to bind a LUN depends on the size of the LUN you are creating. 
The larger the LUN, the longer it takes. For example, binding a RAID 5 LUN with 
18-Gbyte disks can take up to 60 minutes.

Содержание Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов