manualshive.com logo in svg

HP Surestore Disk Array 12h - And FC60, Руководство для продвинутых пользователей, Страница: 291 / 466

Поделиться
Скачать
HP Surestore Disk Array 12h - And FC60 Скачать руководство пользователя страница 291

Managing the Disk Array Using Array Manager 60      

 291

M

a

na
ging

 the

 Di
sk 
Array 

on HP-UX

Command Examples

The following example binds a 5-disk, RAID 5 LUN on disk array 0000005EBD20. The disk 
array includes five disk enclosures, each on its own channel. The LUN uses a stripe 
segment size of 16 

K

bytes, is assigned LUN number 2, and is owned by controller A. Note 

that each disk is in a different enclosure for high availability, and that there are no spaces 
between the individual disk parameters. 

amcfg -L A:2 -d 1:1,2:2,3:1,4:4,5:3 -r 5 -s 16 0000005EBD20

The following example binds a RAID 0/1 LUN on disk array rack_51. The LUN is owned by 
controller B, is assigned LUN number 4, and uses a stripe segment size of 4 

K

bytes. Note 

that the disks selected create mirrored pairs that are in separate enclosures (1:3, 2:3 and 
1:4, 2:4). This maintains high availability. Although RAID 1 is specified, the inclusion of 
more than two disks causes the disk array to create a RAID 0/1 LUN.

amcfg -L B:4 -d 1:3,1:4,2:3,2:4 -r 1 -s 4 rack_51

-force

Allows you to bind a LUN using two or more 
disks in the same enclosure or on the same 
channel. This option allows you to override 
the high-availability protection designed into 
the LUN binding process. Using this option 
you can specify more than one disk per 
enclosure or channel. You can also use this 
option to create a RAID 5 LUN that includes 
more than six disks.

If not specified, you cannot bind a 
LUN using multiple disks in the 
same enclosure. You also cannot 
bind a RAID 5 LUN with more than 
six disks.

-s segmentsize

Indicates the stripe segment size in Kbytes. 
The stripe segment size must be a multiple 
of the current cache page size setting. For 
example, if the cache page size is set to 4 
Kbytes (8 blocks), valid settings would be 4, 
8, 16, 32, 64, 128, etc.

If not specified, the stripe segment 
size defaults to the same block size 
used for the cache pages (4 Kbytes 
or 16 Kbytes). The default cache 
page size is 4 Kbytes.

Table 38  

 Command Options for Binding a LUN  (cont’d)

Option

Description

Default

Содержание Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов