manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 396 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 396

8-90

ES User’s Guide

Hardkey/Softkey Reference

T

Softkey in the BOOTP setup menu. Allows you to set the number of
seconds your analyzer will wait for a BOOTP reply at boot time. The
analyzer will retransmit the BOOTP request during this period if it
gets no reply. The retransmission time increases exponentially but is
bounded.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the modify kit menu. Allows you to modify the following
characteristics of the thru calibration standard in your calibration kit:
delay, loss, and Z

0

.

See

“Calibration Kits” on page 6-23

 for more information.

Access Keys:

Softkey in the title and clock menu. Used to show the title (if any) and
date/time on the display and/or on a hardcopy output.

Access Keys:

or

Softkey in the more display menu. Displays the menu to display and
edit the screen title and display clock.

Access Keys:

Softkey in the more printer menu. Sets the top margin of the printout
(non-printing space) in mm. Minimum setting is 0.00 mm (default);
maximum setting is 200.00 mm.

Access Keys:

Softkey in the save ASCII menu. Also known as S2P data format.
Saves measurement data in a format compatible with CAE programs.

See

“Saving Instrument Data” on page 4-57

 for more information.

Access Keys:

 Timeout

SYSTEM OPTIONS

 LAN  BOOTP Setup

 Thru

CAL

 More Cal  Cal Kit

 Modify (connector type)  Broadband Passive

 Title+Clk

 ON off

DISPLAY

 More Display  Title and Clock

HARDCOPY

 Define Hardcopy  Define Graph

 Title and Clock

DISPLAY

 More Display

 Top Margin

HARDCOPY

 Define Printer  More Printer

 Touchstone

 Format

SAVE RECALL

 Define Save  Save ASCII

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов