manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 346 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 346

8-40

ES User’s Guide

Hardkey/Softkey Reference

H

Softkey in the SICL LAN setup menu. Allows you to enter an HP-IB
device address (bus address) for your analyzer for use with SICL LAN.
The default HP-IB device address is 18.

See The LAN Interface User’s Guide Supplement for more information.

Softkey in the HP-IB menu. Toggle to ON if you want to display HP-IB
mnemonics on screen as keys are pressed. This is a convenient way to
see the mnemonics associated with the keys.

NOTE

Not all keys (especially those that display menus)
have mnemonics.

Access Keys:

Softkey in the SICL LAN setup menu. Allows you to enter a logical
unit number for use with SICL LAN. The logical unit number is the
same as the interface select code (ISC). The default logical unit number
is 7.

See The LAN Interface User’s Guide Supplement for more information.

Softkey in the SICL LAN setup menu. Allows you to enter the name for
a client device that communicates with the analyzer using SICL LAN.
The default HP-IB name is

hpib

.

See The LAN Interface User’s Guide Supplement for more information.

Softkey in the custom colors menu. Use this key to customize the colors
of display items on your external monitor. Values accepted for hue are
0 to 99. Zero represents red, and the approximate color progression
from there is: orange, yellow, green, cyan, blue, magenta and back to
red.

See

“Using an External VGA Monitor” on page 4-87

 for more

information.

Access Keys:

 HP-IB Dev.

 Address

 HP-IB Echo

 on OFF

SYSTEM OPTIONS

 HP-IB

 HP-IB Log.

 Unit

 HP-IB Name

 Hue

DISPLAY

 More Display  Color Options

 Custom Colors

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов