manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 338 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 338

8-32

ES User’s Guide

Hardkey/Softkey Reference

F

Softkey in the system bandwidth menu. This is the narrowest system
bandwidth available. (Medium wide is the default system bandwidth.)

See

Chapter 5

 for information on how system bandwidth can affect

your measurements.

Access Keys:

Softkey in the marker math menu. Calculates the flatness of a
user-defined trace segment.

See

“To Use Marker Math Functions” on page 4-18

 for more

information.

Access Keys:

Hardkey in the CONFIGURE area. Pressing this key displays a menu
of choices for the display format of your measurement.

The choices available are: Log Mag, Lin Mag, SWR, Delay, Phase,
Smith Chart, Polar, Real, Imaginary, and Impedance Magnitude. For
more information on each of these choices, see its entry in this chapter.

Softkey in the format disk menu. Formats a disk in the analyzer’s
built-in disk drive in DOS format.

See

“Formatting a Floppy Disk” on page 4-67

 for more information.

Access Keys:

Softkey in the file utilities menu. Displays the format disk menu to
select either the internal non-volatile memory, internal volatile
memory, or 3.5” floppy disk (in the analyzer’s built-in disk drive).

Access Keys:

Softkey in the format disk menu. Formats the internal non-volatile
RAM disk.

CAUTION

Formatting the internal non-volatile RAM disk
erases all existing files and directories on the
disk.

Access Keys:

 Fine 15 Hz

AVG

 System Bandwidth

 Flatness

MARKER

 Marker Functions  Marker Math

FORMAT

 Format

 3.5” Disk

SAVE RECALL

 File Utilities  Format Disk Menu

 Format

 Disk Menu

SAVE RECALL

 File Utilities

 Format

 NonVol RAM

SAVE RECALL

 File Utilities  Format Disk Menu

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов