manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 324 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 324

8-18

ES User’s Guide

Hardkey/Softkey Reference

C

Softkey in the file utilities menu. Used to copy files.

See

“Other File Utilities” on page 4-63

 in for more information.

Access Keys:

Softkey in the file utilities menu. Used to copy files.

See

“Other File Utilities” on page 4-63

 for more information.

Access Keys:

Softkey in the copy file menu. Used to select the analyzer's built-in disk
drive as the destination drive for copying of files. Displays the
character entry menu to rename file (if desired) prior to copying.

Access Keys:

,

or

Softkey in the copy file menu. Used to select the analyzer's internal
non-volatile RAM as the destination drive for copying of files. Displays
the character entry menu to rename the file (if desired) prior to
copying.

Access Keys:

,

or

Softkey in copy file menu. Used to select the analyzer's internal
volatile RAM as the destination drive for copying of files. Displays the
character entry menu to rename file (if desired) prior to copying.

Access Keys:

,

or

Softkey in the system configuration menu. Displays the menu to set
the external CRT position and timing parameters for best image.
These settings are not affected by presetting the analyzer.

NOTE

These adjustments also affect the internal CRT of
the analyzer.

See

“Using an External VGA Monitor” on page 4-87

 for more

information.

Access Keys:

 Copy All Files

SAVE RECALL

 File Utilities

 Copy File

SAVE RECALL

 File Utilities

 Copy to

 3.5” Disk

SAVE RECALL

 File Utilities

 Copy File

 Copy All Files

 Copy to

 NonVol RAM

SAVE RECALL

 File Utilities

 Copy File

 Copy All Files

 Copy to

 Vol RAM

SAVE RECALL

 File Utilities

 Copy File

 Copy All Files

 CRT Adjust

SYSTEM OPTIONS

 System Config

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов