manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 195 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 195

ES User’s Guide

4-61

Using Instrument Functions

Saving and Recalling Measurement Results

Using Fast Recall
with the Front
Panel or a
Keyboard

The fast recall feature allows you to recall an instrument state with just
1 or 2 key presses, or to cycle through up to seven different instrument
states with a foot switch or hand switch.

1. Press

.

2. If the measurement display area changes to a listing of files on the

currently selected disk, fast recall is off.

If the measurement display area remains unchanged, fast recall is on.
To follow along with this explanation, turn fast recall off by pressing
the

 softkey.

3. If necessary, select the internal non-volatile RAM disk by pressing

.

4. If you have previously saved any files to this disk, they will now be

listed on the display.

5. The fast recall feature utilizes only the first seven files listed that

contain instrument state, calibration, or measurement data.

6. If you have not previously saved any files to this disk, you may want

to save a few instrument states now, to follow along.

7. Press

. Note that the

measurement display now reappears on the screen and that there are
file names next to the first seven softkeys. (If any of the softkeys are
blank, it's because you had less than seven files saved on the disk.)

The files are placed on the softkeys in the order in which they appear
in the disk's directory table.

NOTE

You may want to use the

 feature to give your files more

meaningful names. See

“Other File Utilities” on page 4-63

 for

information on renaming files.

8. To "fast recall" an instrument state, press the softkey next to the file

that contains the instrument state.

9. The fast recall toggle will remain on (even when the analyzer is

) until manually turned off.

10. With the fast recall feature turned on, you will always be only 1 or 2

key presses away from recalling an instrument state.

SAVE RECALL

 Fast Recall ON off

 Select Disk  Non-Vol RAM Disk

Prior Menu  FastRecall on OFF

 Rename File

PRESET

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов