manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 178 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 178

4-44

ES User’s Guide

Using Instrument Functions

Using Reference Tracking

To Track a Frequency

1. If you want to move the reference position (indicated by the

 symbol

on the left side of the display), press
and then use the front panel knob, the

 keys, or the

numeric keypad to enter a new reference position. A number is
assigned to each possible reference position. See

Figure 4-19

.

2. Press

.

Use the front panel knob, the

 keys, or the numeric

keypad to enter the frequency of interest.

3. Press

. The

reference level is now adjusted with each sweep so that the frequency
of interest falls on the reference line. Note that the y-axis is now a
relative scale, with all amplitude values referenced to the reference
line. Also note that a small arrow appears underneath the
measurement trace at the point where the frequency of interest
intersects the reference line.

4. To turn reference tracking off, press

. The y-axis reverts to its previous

scale format, and the reference level is readjusted so that the
measurement trace is placed correctly on the display for absolute
measurements.

SCALE

 Reference Position

SCALE

 Reference Tracking  Set Track Frequency

SCALE

 Reference Tracking  Track Frequency

SCALE

 Reference Tracking  OFF

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов